Logo digitizing that keeps your logo sharp in thread

Send your logo and tell us where it goes. A digitizer rebuilds it as a stitch file for that size and fabric, so small text stays readable and your brand colors stay right. You review a digital proof before you order.

  • Small text kept readable
  • Brand colors matched to thread
  • A file for every placement
  • Free revisions until you approve
Flat two-color Northstar Coffee Roasters logo artwork on a white background
The Northstar Coffee Roasters logo stitched in navy and gold thread on white fabric
Logo artworkStitched logo

What is logo digitizing?

Logo digitizing turns your logo into a stitch file that an embroidery machine can read. A digitizer rebuilds each letter, line and shape as thread, then sets the size, the stitch direction and the sewing order for the spot where the logo will go.

A logo file on your screen is only a picture. The machine needs instructions, so the same logo gets a new file for each size and placement.

On this page

What logo digitizing means for your brand

Your logo is a picture. Thread is not. When a logo is stitched, every flat color becomes rows of tiny stitches and every thin line becomes a narrow band of thread. The digitizer decides how each part is built, so the finished logo still reads as yours.

The same logo needs different choices on a 3 inch polo, a cap front and a jacket back. Letters that look fine on a screen can fill in at a small size, and a fine outline can disappear into the fabric.

What you send

  • Your logo file, in any format you have.
  • Where it will be stitched, and the width you want.
  • The garment and fabric, if you know them.

What you get

  • A stitch file in your machine's format, sized for that spot.
  • A digital proof to check before you order.
  • Free revisions until you approve the sew-out.

Why logos need extra care

A logo repeats on every shirt, cap and bag you order, so a small mistake in the file repeats too.

  • Small text has to stay readable

    Lettering is the first thing to fill in at a small size. We set letter height, spacing and stitch direction so each letter stays open.

  • Brand colors have to match

    We match each key color to the closest thread and list the thread numbers, so your embroiderer can reorder them.

  • Every placement is a new file

    A file made for a chest cannot simply be shrunk for a sleeve or stretched for a back. We size the stitches for each spot.

  • Every garment has to look alike

    Staff, teams and customers wear your logo on different items. One approved design keeps it the same on all of them.

How logo digitizing works

Every logo order follows the same four steps. There is no account to create and no minimum order.

  1. Send your logo and placement

    Fill in the quote form. Upload your logo in any format and tell us where it goes, the width you want and the garment.

  2. We check the artwork

    We look at the logo at its real stitching size, note small text, thin lines and colors that need a decision, then send your price and any questions.

  3. Review your digital proof

    A digitizer builds the file by hand and a second digitizer checks it. You see the logo at real size with the thread colors listed.

  4. Approve and sew

    Once you approve, we send the final file in your machine's format. If the sew-out needs a change, send a photo and we adjust the file.

Logo sizes and placements

Where the logo goes decides how big it can be and how much detail it can hold.

PlacementTypical sizeWhat to expect
Left chest3 to 4 inches wideThe most common placement. Small text works down to about 0.25 inch tall.
Cap front2 to 2.5 inches tallCurved and stiff. Keep it simple, with fewer thin lines.
Sleeve2.5 to 3 inches wideA narrow space, so a short wordmark or icon works best.
Back of a shirt or jacket10 to 12 inches wideRoom for detail, but large logos need more stitches and a smart sewing order.
Bag, apron or towel3 to 5 inches wideThick or looped fabric needs bolder lines and a firm underlay.

Sizes are examples. Tell us your width and garment and we fit the file to them.

Before and after: logos in thread

Each pair shows the original logo next to the stitched sample. Drag the needle to see what changed.

Soft, low-resolution JPG of the Summit Ridge Outfitters Co. round mountain badge logo
The Summit Ridge Outfitters Co. badge logo stitched in thread on indigo twill fabric

Logo fileStitched

Round badge logo on twill

A mountain badge sent as a small, soft JPG. Its edges had to be rebuilt before stitching could start.

  • Soft edges redrawn into clean outlines.
  • Satin borders keep the badge edge crisp.
  • Fills split into zones so large areas stay flat on twill.
Size
4 in wide
Stitches
9,600
Fabric
Indigo twill
Files
DST, PES

Sample designs shown for layout preview.

What makes a logo hard to stitch

Most logos stitch well. These six details need a decision, and we make it with you.

  • Small text

    Letters under about 0.25 inch tall fill in easily. We make them bolder or suggest a larger size.

  • Thin lines

    A hairline is far thinner than a thread. We rebuild thin lines as a run stitch or a narrow satin.

  • Tiny gaps

    Gaps between letters can close as thread pulls the fabric. We open them up a little.

  • Gradients and shadows

    Thread has no fade. A gradient becomes two or three solid colors, and a shadow is simplified or dropped.

  • Many colors

    Each color change adds a stop for the machine. We combine close colors where the logo allows.

  • Low contrast

    White thread on a white polo disappears. We flag weak color pairs and suggest an outline.

Logo digitizing prices

The price depends on logo size, detail and stitch count. These are starting prices. Your quote is the exact figure.

LogoWhat it meansFrom
Simple logoText or one to two colors, up to 3.5 inches wide$12
Standard logoThree to five colors, or an icon with a name$18
Detailed logoSix or more colors, small text or fine lines$26
Same logo, new sizeYour approved logo rebuilt for a cap, sleeve or bag$8

Rush service is available. We quote it with your price.

What logo files to send

The cleaner the logo file, the faster and sharper the result. You do not need a perfect file to start.

Best to send

  • A vector file: AI, EPS, SVG or PDF
  • A PNG with a clear background, at least 1,500 pixels wide
  • Your brand colors, as thread numbers or color names
  • The width you want and where the logo goes
  • The garment and its color

Also works

  • A JPG from your website or social page
  • A photo of a business card, sign or uniform
  • A photo of a logo you already have embroidered
  • A low-resolution file, which we may redraw first

Logos we have digitized

A few finished logos, stitched from the files we built.

  • Sweet Crumb Bakery logo stitched in red and navy thread on cream fabric: a filled heart above script lettering
    Sweet Crumb BakeryScript lettering and a filled heart, stitched for aprons.
  • Trailhead Outdoor Co. logo stitched in white and gold thread on green fabric: line mountains under a gold sun
    Trailhead Outdoor Co.Line mountains and a gold sun, stitched for caps and jackets.
  • Wrenchworks Motor Garage logo stitched on navy fabric: a red gear with a white ring above white block lettering
    Wrenchworks Motor GarageA gear emblem with bold block lettering for work shirts.
  • Volt Electric logo stitched on black fabric: a gold lightning bolt above white block lettering
    Volt ElectricA lightning bolt over heavy lettering, stitched on dark fabric.

Sample designs shown for layout preview.

Have a logo to stitch?

Send your logo and get a price and a digital proof before you order.

Email your logo

Logo digitizing questions

Can't find your answer? Send a message with the Get a Quote form and we will reply.

How much does logo digitizing cost?

Logo digitizing starts at $12 for a simple logo, $18 for a standard one and $26 for a detailed one. Your quote is the exact price. Rush service is quoted with it.

How long does logo digitizing take?

Most logos are ready in about 24 hours. A large or very detailed logo can take a little longer. Rush service is available.

What size should my left chest logo be?

Most left chest logos are 3 to 4 inches wide. A short wordmark can go a little wider and a tall logo may need to be narrower. Tell us the width you want and we build the file at that size.

How small can the text in my logo be?

Thread cannot hold very small letters. About 0.25 inch tall is a safe minimum on most fabrics. Below that, we make the letters bolder, suggest a larger size or simplify the logo, and show you the result in the proof.

Do I need a vector logo?

No. A vector file such as AI, EPS, SVG or PDF is the best start, but a large PNG or JPG also works. If your file is small or blurry, we may redraw it first, and we tell you before we start.

Can you match my brand colors?

Yes. Send thread numbers or the color names from your brand guide. We choose the closest thread and list the numbers on your proof, so your embroiderer can reorder them.

Can I use the same file on a cap and a polo?

Not usually. A cap curves and a polo stretches, and the sizes differ, so each placement works best with its own file. We rebuild an approved logo for a new size at a lower price.

Which file format should I ask for?

Ask for the format your machine reads. DST is the safest choice for most commercial machines. We also send PES, EXP, JEF, HUS, VP3, XXX and EMB.

What if the sew-out does not look right?

Send us a photo and tell us the fabric and the machine. We find the cause and adjust the file. Revisions are free until you approve the sew-out.

Is my logo kept private?

Yes. We use your logo only to build your files. We never share it, post it or use it as an example without your written approval.

Ready to see your logo in thread?

Send your logo and get a price and a digital proof before you order. There is no account to set up and no minimum order.

Email your logo
Scroll to Top